AEM ELECTRONICS: New Infinity Plug and Play ECU for 2003-06 Nissan 350z and Infiniti G35

AEM Electronics has released its Infinity Plug & Play programmable ECU for the 2003-’06 Nissan 350Z/Infiniti G35 equipped with a manual transmission (Infinity-8 PN 30-7110 and Infinity-10 PN 30-7107). The Infinity ECU for the 350Z/G35 includes an application-specific start-up calibration and connects via a Plug & Play harness that is sold separately (PN 30-3520). It is designed to fit in the factory location (requires AEM bracket on G35 models, PN 30-5936 Coming Soon).

Complete Stand Alone Engine Control
The Infinity ECU combines with the Plug & Play harness to replace the 350Z/G35’s factory ECU. It controls all of the engine functions including up to four cam variable cam control (VQ35DE-RU) and the Drive by Wire (DBW) system. An AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.

Plug & Play Harness with Expansion Port
AEM’s sealed, weatherproof Plug & Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor. The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift.

Uses Factory Wideband Sensors
On 2004.5-up VQ35DE and VQ35DE-RU 350Z/G35 models, the Infinity is able to use the factory wideband air/fuel ratio sensors, eliminating the need for additional sensors and cables. A fuse and relay for battery positive is integrated into the adapter harness for models that require ancillary wideband sensors.

Map Switching via Cruise Control Buttons
For 350Z/G35s equipped with cruise control, AEM incorporated the Infinity’s map switching capability into the factory cruise control buttons on the steering wheel, eliminating the need to wire in and mount an ancillary position switch. Using InfinityTuner software, users can now select from 8 modes for boost control maps, fuel maps, timing maps and Lambda target, and select maps on the fly using the factory cruise UP (ACCEL/RES) and DOWN (COAST/SET) toggle button.

To ensure that drivers know which mode they are in when not connected to the Infinity ECU, when the vehicle is keyed ON the tachometer moves to a specific RPM point to indicate which map the Infinity is using (for example 3k RPM indicates Mode 3, 4k RPM indicates mode 4, etc.). When the driver changes maps while driving, the tachometer will momentarily change from revs to the RPM point that indicates the switched mode and then resume normal tachometer operation. Actual engine RPM will not be affected during this brief period.

Three-Step Rev Limiter
Users can configure the 350Z/G35’s CRUISE ON/OFF as a temporary three step limiter switch through the InfinityTuner software (vehicle speed or time after launch dependent), and can set rev limits at specific rpm by points or set a flat limiter and use it as an RPM hold for launches.

Traction Control
The Infinity is able to use the 350Z/G35’s factory wheel speed/ABS sensors for traction control via fuel cut, spark cut, spark retard or retracting DBW throttle response in 350Z/G35s equipped with factory cruise control, eliminating the need to install additional sensors for traction control (in applications without cruise control, these functions can be incorporated through the 12 pin auxiliary port on the plug & play harness with a trim position switch).

The cruise control CANCEL button can be configured as a traction control enable or disable button through the InfinityTuner software. Users can define a specific slip target for traction control in the software and turn it on or off using this button, or set two slip targets and use it for a mild and aggressive traction control strategy.

User Definable DBW Throttle Response
Users can define throttle curves in the InfinityTuner DBW software and take full control of throttle response. Using an ancillary switch via the 12 pin auxiliary port, drivers can change throttle response rate on the fly via two DBW settings (ideal for setting rain mode throttle curves).

Communicates with Factory CAN bus
The Infinity ECU communicates with the 350Z/G35’s factory CAN bus system and retains full functionality of the tachometer, speedometer, coolant temp gauge, fuel economy meter, MIL light, coolant fan control and vehicle speed sensors. On 350Z/G35s using Nissan’s Vehicle Dynamic Control (VDC), the Infinity is able to log steering angle and brake pressure.

The Infinity EMS delivers high-end engine control for the racing masses at a fraction of the cost. Built around a latest-generation 200MHz automotive processor, the Infinity is capable of processing 400 MIPS (millions of instructions per second). All Infinity systems come fully enabled without the need for feature add-on purchases. Combined with AEM’s industry leading after-purchase support system, including free technical support, the Infinity is the ultimate engine control solution for both professional race teams and weekend track cars.

The Infinity’s airflow-based tuning models simplify start up and speed up the tuning process by eliminating many of the lookup and trim tables (Correction Tables) necessary in previous generation ECUs.

Airflow model based (VE) tuning
ECU Set Up Wizard simplifies start up
Flex fuel compatible
Multi fuel capable
Drive by wire
Variable valve control
Multiple boost control strategies
Nitrous control
Map switching
Dual internal Lambda controllers
Dual knock sensing circuits
Data logging up to 64GB, up to 100 channels at 1KHz
Outputs to 3rd party dashes and data loggers
Industry leading data transfer speed (up to 480Mb/sec)
Integrated engine protection strategies
Sealed enclosure and IP67 rated comms ports

Place your order today

Call your LAUNCH Sales person for pricing at (626) 839-7150.

TAKEDA: Intake System for 2013-up Honda Accord V6

LAUNCH Distribution is proud to announce the all new Takeda Retain Intake System for the 2013-2014 Honda Accord with the V6-3.5L engine.

This Takeda Retain intake system produces up to 17HP and 15lbs. x ft. of torque over stock, while outflowing the factory intake by 21%. A one piece wrinkle-black powder-coated heat shield is used to protect the filter from unwanted hot engine air for maximum performance. This system is available in the option of a polished or a wrinkle-black powder-coated intake tube. Takeda intakes come complete with all necessary hardware.

Part Numbers
– Polished Tube w/ PRO DRY S Filter (P/N: TR-1021P-D)
– Wrinkle-Black Tube w/ PRO 5R or PRO DRY S Filter (P/N: TR-1021B-R)

Place your order
Contact your LAUNCH Sales rep for complete details and pricing at (626) 839-7150.

VIDEO: About Eibach Pro-Kit Suspension Springs

Check out the Eibach Pro-Kit springs in this informational video from the most notable suspension company in the world.

For the latest Eibach product applications contact your LAUNCH Sales rep at (626) 839-7150.

*To view in HD, go to settings (GEAR symbol on lower right corner of video) and change format to 720p after you’ve press the PLAY button.

AFE POWER: Magnum Force Intake for 2011-2013 Dodge Charger V6

LAUNCH Distribution is excited to announce the arrival of the Magnum Force Intake for 2011-2013 Dodge Charger/Challenger/Chrysler 300 V6-3.6L from afe Power.

This cold air intake system produced 13 max horsepower, 17lbs. x ft. torque and out-flowed the factory intake by 37%. Included in this cold air intake system is a 18 gauge powder-coated heat shield and a massive 8” tall, radial flow aFe Power filter. The air filter uses a unique patent pending flange retention design that allows the filter to be securely mounted to the heat shield without any hardware. A huge 1-piece mandrel bent wrinkle-black powder-coated intake tube maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.

Part Numbers
– PRO 5R (P/N: 54-12152-B)
– PRO DRY S (P/N: 51-12152-B)

Place your order today!
Call your LAUNCH Sales rep at (626) 839-7150 for pricing.

AFE POWER: Magnum Force Intake System for 11-13 Mini Cooper S

LAUNCH Distribution is proud to announce the arrival of the Magnum Force Intake System for 2011-2013 Mini Cooper S with the L4-1.6L turbo engine from afe POWER.

This Stage-2 intake system produces up to 18HP and 20lbs. x ft. of torque over stock, while outflowing the factory intake by 49%. Included in this system is a washable/reusable high-flow conical air filter that uses progressive weave media for maximum air-flow. The air filter uses a unique bump lock flange design that allows the air filter to securely mount to the heat shield with no hardware. This intake system uses a 16 gauge steel heat shield that is positioned under the factory hood scoop to supply the air filter with cool, dense air for maximum performance. The heat shield mounts to the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations.

Available Part Numbers:
PRO 5R (P/N: 54-12452)
PRO DRY S (P/N: 51-12452)

Place your order now
Contact your LAUNCH sales rep for pricing at (626) 839-7150.

AFE POWER: Magnum Force Intake System for 11-14 Mustang

LAUNCH Distribution is excited to announce the arrival of the Magnum Force Air Intake System for 2011-2014 Ford Mustang by afe Power.

Add more power to your Mustang 5.0L with the aFe Stage-2 performance intake system. This Stage-2 cold air intake system produces 22hp and 27lbs. x ft. torque and outflowed the factory intake by 33%. A one-piece 16 gauge stainless steel, powder-coated heat shield uses an auxiliary air scoop to directly supply cool air from the front of the vehicle straight to the filter for maximum performance.

This intake system also features an aluminum intake tube with a built-in MAF pad and is attached to a 3-angle filter adapter to smoothly guide increased air-flow into the engine with minimal restriction. The high-flow air filter is washable and reusable and is constructed with 100% polyurethane for a long life and multiple cleaning cycles.

Available Part Numbers:
PRO 5R w/ Wrinkle-Black Tube (P/N: 54-11982-B)
PRO DRY S w/ Wrinkle-Black Tube (P/N: 51-11982-B)
PRO 5R w/ Polished Tube (P/N: 54-11982-P)
PRO DRY S w/ Polished Tube (P/N: 51-11982-P)

Place your order today
Call one of our experienced sales rep for complete details and pricing at (620 839-7150.

AFE POWER: Mach Force XP Exhaust for 12-13 VW Beetle Turbo

LAUNCH Distribution is proud to announce the arrival of the MACH FORCE XP EXHAUST System for 2012-2013 Volkwagon Beetle by afe Power.

– 304 Stainless steel dual cat-back exhaust
– minimized restriction for improved performance
-mitered collectors decrease turbulence and increase exhaust velocity
– increased horsepower, torque and improves throttle response

Part Number:

Place your order
Contact your LAUNCH Sales rep for more details and pricing at (626) 839-7150.

WHITELINE: BOGO Promotion – Buy One Get One FREE

LAUNCH Distribution is excited to announce the BOGO promotion by WHITELINE. Now’s the time to restock your Whiteline inventory and take full advantage of this limited promotion. Offer valid until September 21, 2013.

The end of Summer sway bar endlinks SALE.  Now drivers can increase front and rear sway bar effectiveness.

When your consumer buys 1 set of endlinks, they get another set of equal or lesser value for FREE by submitting the rebate from below.  Excludes part number KLC31.

LAUNCH Distribution is the West Coasts authorized warehouse distributor for Whiteline USA.

For more details contact your LAUNCH sales rep at (626) 839-7150.

DC SPORTS: Front Upper Strut Bar for 08-13 EVO

LAUNCH Distribution is excited to announce the arrival of DC SPORTS “front carbon steel upper strut bar” for the ’08-2013 Mitsubishi EVO, Lancer Ralliart, and Lancer.


Place your order
Call your LAUNCH Sales rep today for pricing at (626) 839-7150.

Don't have an account yet?

Sign up today. It's free and you'll be able to see how much money you'd be saving by utilizing LAUNCH Distribution for your inventory purchases.

Sign Me Up!