Currently browsing Uncategorized Category

Husky Liners: NEW Truck Rail Bed Protection

Launch is proud to announce the arrival of Quad Caps from Husky Liners.

Protect your truck’s bed rails from scratches and dents caused by everyday wear and tear with Husky Quad Caps™. Each truck bed rail is protected by a 2-piece cap; once installed the seam is completely hidden by the cap’s unique styling. Manufactured from highly durable TPO material… Husky Quad Caps™ are thicker and stronger than most other bed rail cap protectors on the market and come with a lifetime guarantee against cracking and breaking. Rugged styling with a factory matched look. Quad Caps™ include removable stake pocket covers and install easily with 3M™ foam tape.

Like all Husky Liners® products… Quad Caps™ are proudly designed and manufactured in the USA.

Place your order
Call your launch Salesperson today for applications and pricing at (626) 839-7150.

AERO: Now In Stock

Launch Distribution is proud to announce the arrival of more Aero Products in our warehouse.

About International AERO Products:
International AERO Products are designed to withstand the most extreme environments on earth, from airfield surface temperatures that can reach 120 F to a frigid -60 F at 50,000 feet above the earth. Until now, AERO products have only been available to the aerospace industry for maintaining the world’s most exclusive aircraft. We offer a wide selection of quality tested and approved cleaning, polishing, protective coating and detailing products for all of your vehicle’s maintenance needs.

Place your order
Call your Launch Sales Rep for pricing at (626) 839-7150.

TURBOSMART: Internal Wastegate for Porsche 993 Turbo

The Porsche 993 Turbo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, Porsche 993 Turbo Internal Wastegate is easy to install and requires no special tools or fabrication. It can’t get any easier!

• Silicone diaphragm with Nomex reinforcement to withstand high temperatures.
• High grade, billet aluminum construction.
• Stainless steel rods and connecting clevis for corrosion resistance.
• Locking Collar design cap allows for quick spring changes.
• Ideal for use with any Turbosmart boost controller.

• Porsche 993 911 Turbo 1995-98

For more information contact your Launch Sales Rep at (626) 839-7150.


Launch Distribution is proud to announce the arrival of The FIVE:AD Scion FR-S Rear Spoiler. The spoiler is made of high grade, OEM quality urethane and FIVE:AD also offers customers the option to have the spoiler pre-painted for an additional cost in any of the 7 Scion FR-S factory colors.

– Requires no holes to be drilled

Place your order
Contact your Launch Sales rep for pricing at (626) 839-7150.

SKUNK2: Alpha Valve Spring and Titanium Retainer Kits

Skunk2 is proud to introduce its Alpha Valve Spring and Titanium Retainer Kits for Honda’s B-series VTEC and K-series engines. Each kit includes Skunk2’s high-quality dual valve springs and race-proven titanium retainers that are the result of nearly two decades of racing and engine building experience.

Each Alpha Valve Spring is manufactured exclusively from super-clean, chrome-silicone wire milled in Japan. By using inner and outer springs mated together through a slight interference fit and with differing frequencies, Alpha Valve Springs are able to prevent valve float and maintain valvetrain stability at engine speeds in excess of 10,000 rpm.

Skunk2’s industry-leading Alpha Titanium Retainers are designed to significantly reduce valvetrain mass, resulting in more horsepower and improved valvetrain stability. Similar to Skunk2’s already popular Pro Series Titanium Retainers, Alpha Titanium Retainers feature radius-cut edges for additional rocker arm clearance and reduced weight, strategically positioned lightening grooves, and reduced overall heights for better valve seal clearance and even further weight reduction.

Alpha Titanium Retainers are manufactured using the latest 3D CAD (Computer Aided Design) and FEA (Finite Element Analysis) to ensure that each is optimized for strength as well as for reduced weight. Skunk2 engineers then test and prove their designs on the engine dyno as well as the race track. Once approved for manufacturing, only medical-grade titanium that’s been ultrasonically inspected and certified is used. Following CNC machining, each retainer is then individually inspected to ensure proper hole diameter, taper, and that each are free from machining defects to ensure proper installed valve spring heights and pressures. Finally, each retainer is serialized for your protection, including valuable information, like material batch specifics as well as production and inspection dates.

Skunk2 designs, develops, and tests its entire valvetrain lineup in-house to ensure superior quality and maximum performance gains. During development, each valvetrain component is tested both on the dyno and the road, including 11,000 rpm drag racing engines and 17,000 rpm superbikes. Manufactured from the best materials available, Skunk2 valvetrain components provide exceptional performance, reliability, and quality and remain standard-issue on each Skunk2 vehicle that we build and support.

Place your order
Call your Launch Sales Rep today at (626) 839-7150

MEGAN RACING: Hyundai Genesis Coupe 2010+ Rear Camber Kit

Wheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under-steer and for optimum tire wear at stock height; under-steer is often undesired from a performance standpoint but is always dependent on driver style, therefore the adjust-ability of the alignment of a vehicle is critical when tuning for speed. The clock does not lie and having the vehicle alignment can make seconds of a difference.

Megan Racing Inc. has developed reinforced and adjustable control arms to accommodate the needs of the aggressive and performance oriented tuner. Being constructed of a Lightweight Steel-Alloy which is able to withstand the stresses of extreme competition, these arms are powder-coated with a 3-Stage process to ensure durability and protection against the elements.

Megan Racing has now developed camber arms for Genesis Coupe enthusiasts that will help attain a higher level of control and performance. Constructed of a Reinforced Rubber Bushing , these control arms remain light weight while being able to take the punishment of competition and extreme conditions. A 3-Stage powder coating process the control arms will easily combat the elements for years of performance.


-Applications: 2010+ Genesis Coupe

– Made with high-strength and anti-cranking rubber material

– Rubber viscosity is around 2000KGS

– Direct replacement/ no modifications needed

Model Number : MRS-HY-0410

Place your order
Contact your Launch Sales person for more details at (626) 839-7150

APEX-i: Smart Accel Controller

The A’PEXi SMART Accel Controller offers instant and direct throttle response for vehicles equipped with Electronic Throttle Control (ETC) Systems. Throttle response that is delayed from ETC or better known as Drive-by-wire throttle is greatly improved with this simple unit and a vehicle specific plug and play harness installation which is connected between the factory accelerator pedal sensor and wiring harness within a few minutes.

[ECO Mode]
There are 3 ECO Mode options. Throttle response time will delay compared to factory throttle simulating the accelerator pedal being pressed gently which can result in fuel economic efficiency due to decreased initial load from the output of the accelerator pedal, in some cases can reduce fuel consumption by up to 10%. The ECO Mode can also be used to desensitize vehicles with abrupt throttle response from the factory, as seen on some vehicles such as the Toyota Tundra Truck.

[Lo-Throttle Mode]
Throttle response will delay from normal mode based upon throttle pedal percentage range. Throttle will react to how the user presses on the pedal between idle-to-full throttle range.

[Boost Mode]
Throttle response time will become quicker and results in improved accelerator pedal feel. Returns to normal mode once pedal is pressed to fully open throttle.

[Hi-Throttle Mode]
Improved throttle response based on throttle percentage range, in this mode throttle will respond as if depressing the pedal in full throttle. Returns to normal mode once pedal is pressed to fully open throttle.

– Simple and Easy push button switch design
– Full-Color A’PEXi Logo LED Switch in 7 different colors per mode
– Reverse-Gear cancel harness is an added safety feature that is an installation option to revert to factory throttle setting when reversing vehicle
– Requires SMART Accel Controller Vehicle Specific Harness for installation and use (+ $70.00)
– Total Package Price: $269.00 (Controller – $199.00 + Harness – $70.00)

Applications: (vehicle specific harnesses)
***Be sure to cross-reference the vehicle specific harness application guide for your specific vehicle***

Place your order
Call your Launch Sales Rep for application and pricing today.

STOPTECH: Unveils New Line of Racing Brake Pads

StopTech®, the ultra performance and racing brand from Centric Parts®, introduces a new line of StopTech® Racing Brake Friction that brings the company’s “Brake Late, Finish First”® philosophy to a wider range of racing disciplines. The new racing pads complement the company’s extensive range of high performance brake component and system upgrades – and help turn any StopTech® system into a dedicated race system.

[STracePadsPathed] Available in four formulations, the new StopTech® Racing Brake Pads are engineered to provide optimal friction levels for a variety of different racing applications. All StopTech® Racing Brake Pads provide shorter stops, increased control through superior pedal modulation, and fade-free performance at extreme racing temperatures. StopTech® Racing pads are designed to provide superior performance in any racing brake system, and match the outstanding performance capabilities drivers have come to expect from all StopTech® Racing Brake Systems and components.

StopTech’s® unique metallic compounds are blended with carbon and graphite particles to provide an optimal high temperature race friction material. The result is smoother, more predictable and more consistent brake engagement along with exceptional release characteristics not found in most other racing friction materials.

StopTech® engineers work directly with race teams, often trackside, to gather valuable experience in dynamic real world conditions. Data is immediately integrated into the research and development process, resulting in optimized brake systems for individual racing programs.

StopTech® Racing Brake Pads Provide:
-Optimized friction levels for shortest stops
-Engineered for extreme temperatures
-Superb modulation and release characteristics
-Low compressibility for precise pedal actuation
-Excellent pad and rotor life

Pad Compound Characteristics
SR34 Compound

-Superior pedal feel and modulation characteristics
-Formulated for high initial bite
-Slight torque rise with temperature
-Extremely low pad and abraded disc wear
-All purpose pad for high grip, high power applications

SR33 Compound
-Slight reduction in torque compared to SR34 Compound
-Excellent pedal modulation for applications requiring a medium friction level
-Flat torque curve with temperature rise
-Extreme fade resistance
-Great for rear applications that require less friction but same level of control as SR34 Compound

SR32 Compound
-Similar friction levels to the SR34 Compound
-Linear torque curve with temperature rise with excellent release characteristics
-Superb abraded disc wear
-Maximum high-temperature stability
-For medium to high horsepower applications that require higher friction levels

SR30 Compound
-Medium to low friction levels with linear torque curve with rising temperature
-Extreme high temperature fade resistance
-Excellent modulation and release characteristics
-Repeatable performance
-For Touring Car rear applications and others requiring lower torque

StopTech® Racing Brake Friction products are available now. For more information about any StopTech product, visit

Whiteline: New Product Added to Motorsports Inventory

Launch Distribution is proud to announce the arrival of Whiteline to our motorsports inventory.

Whiteline boasts a worldwide reputation as a leading manufacturer of replacement, enhancement and performance suspension components that deliver significant gains in vehicle balance, steering precision, grip levels and outright driving performance.

Consisting of adjustable sway bars (also known as Stabilizer Bars or Anti Roll Bars), chassis bracing, alignment products and chassis control bushing kits, Whiteline products provide automotive workshops, tuners, enthusiasts and racers with innovative solutions to suspension and handling problems while delivering proven performance & problem solving outcomes for many of the worlds vehicle platforms.

Place your order
Contact your Launch Sales Rep for applications and pricing today at (626) 839-7150.

Don't have an account yet?

Sign up today. It's free and you'll be able to see how much money you'd be saving by utilizing LAUNCH Distribution for your inventory purchases.

Sign Me Up!