LAUNCH Distribution is excited to announce the arrival of the NEW 2013 Scion FRS / Subaru BRZ DCS-Dual Canister Catalytic Back Exhaust System by DC SPORTS to our motorsports line.
It is constructed of T304 stainless steel, fully polished to a show quality finish. Featuring cast flanges for its superior strength and leak-free seals, comes with 2.5 inch piping to dual 2.5 inch round tank mufflers, it is finished off with a single DC sports logo engraved 4 inch tip on each side. All necessary hardware is included for a quick, easy worry free installation. This exhaust features our new Passive Resonance Chamber (PRC) to “tune” the tone and adjust the harmonics so it’s pleasing but doesn’t affect performance. Sizing is calculated so certain tones reflected by the Passive Resonance Chamber (PRC) cancel out unwanted frequencies. Throttle response is enhanced, adding a growl of authority under acceleration while providing a reasonable tone at cruising and idle. The DC exhaust adds a much needed voice to the aggressive looks and sporty handing that comes on the FRS-BRZ. Tested, designed and developed in house by DC Sports.
Part# DCS7049
• Lowers backpressure to increases throttle response – Allowing engine to breathe easier
• Adds an aggressive tone under acceleration
• T304 stainless steel w/ high polish finish
• Easy bolt on installation
• Industry standard one year warranty
• DC Sports quality
Data Specs:
Material: T304 Stainless Steel
Piping Size: 2.5 inch (63.5mm)
Tip Size: 4 inch (102mm)
Configuration: Dual Canister w/ Dual Tips (one per side)
Muffler Diameter: 2.5 inch (63.5)
Fitment Position: Utilizes OEM hanger positions
Hardware: all necessary hardware included (instructions, gaskets, bolts and nuts)
Installation time: approximately 1 hour.
Part# SCD7049
• Lowers backpressure by replacing catalytic converter – Allows the engine to breathe easier
• T304 stainless steel w/ high polish finish
• Easy bolt on installation
• Industry standard one year warranty
• DC Sports quality
• For competition off-road use.
Data Specs:
Material: T304 Stainless Steel
Piping Size: 2.5 inch (63.5mm)
Fitment Position: Utilizes OEM positions
Hardware: all necessary hardware included (instructions, gaskets, bolts and nuts)
Installation time: approximately 1/2 hour.
Coming soon!!!
Part# CSB1407 (aprox 1 week)
• Solid one piece design
• Significantly increases front end chassis rigidity
• High strength mild steel construction
• Durable powder coated finish
• Easy bolt on installation
• Industry standard one year warranty
• DC Sports quality
Data Specs:
Material: Mild Steel
Tubing Size: 1.25in (32mm) diameter tubing
Fitment Position: Utilizes OEM mounting positions
Hardware: all necessary hardware included (instructions, bolts, spacers and washers)
Installation time: approximately 1/2 hour.
Part# SOP7049 (aprox 6-8 weeks)
• Allows the engine to breathe easier
• T304 stainless steel w/ high polish finish
• Easy bolt on installation
• Industry standard one year warranty
• DC Sports quality
• For competition off-road use.
Data Specs:
Material: T304 Stainless Steel
Piping Size: 2.5 inch (63.5mm)
Fitment Position: Utilizes OEM positions
Hardware: all necessary hardware included (instructions, gaskets, bolts and nuts).
Installation time: approximately 1 hour.
PLACE YOUR ORDER
Contact your LAUNCH Sales Rep for pricing and availability at (626) 839-7150.
