News

NOW IN STOCK: Magnaflow Exhaust for 2018 up Jeep Wrangler (JK)

We’re excited for the arrival of the dual tip cat-back exhaust system from Magnaflow. The system features a 5x5x14″ resonator connected to a 5x8x18 muffler that complement two 4″ polished tips. For an additional cost this exhaust system offers configurations for the extreme outdoor enthusiasts. The rear section can be reconfigured as a rockcrawler setup and off road pro setup. Contact your LANUCH sales rep for more details.

MAGNAFLOW-19416

NOW IN STOCK: Injen Cat-Back Exhaust for 2017-up Civic Type R

Unleash some of that hidden power in your 2017-18 Honda Civic Type-R with Injen’s new stainless steel cat-back exhaust system. This kit is 100% hand TIG-welded and handcrafted using 3” mandrel bent 304 stainless steel tubing and sports a sick free-flowing muffler. All this combine to increase performance flow and deliver gains of up to +9 HP and +11 lbs. x ft. TQ! SES1582TT is a uniquely designed system that incorporates a single in dual out free flow muffler to improve performance across the power band while maintaining a smooth, deep tone. The Dual 4 ½” Burnt Titanium tips provide a track-ready, JDM look.

2018-INJEN-ses1582tt

WHITELINE: Rear Lower Control Arm and Vertical Links for 2015 up Mustang

Whiteline is committed to continuous development on the S550 2015+ Mustang Chassis. No over 18 specific products and counting for this chassis, Whiteline’s own 2017 Mustang GT serves as a test bed for performance suspension products and is raced in the Optima Ultimate Street Car, Global Time Attack, and NMCA West Autocross Series.

New Releases:
Whiteline KTA228 Lower Control Arm: This arm helps reduce flex reducing the potential for deflection or unintended changes in rear Toe. On Car adjustability allows for precise toe alignment tuning of the rear suspension. Kit also comes complete with factory toe lock out washers to maintain desired settings.

Whiteline KTA229 Vertical Links: Designed from high performance 6061-T6 forged aviation grade aluminium. The arm along with the minimal flex polymer bushings removes the nasty undesirable effects of rubber bushing oscillations under high loading, maintaining consistent alignment angles during cornering and eliminating wheel hop.

2018-Whiteline-KTA228

INJEN: Cat-Back Dual Exhaust for 16-18 Honda Civic 1.5T Sedan

Are you looking to increase the performance and get a more aggressive sound on your Civic? Well then, take a look at this 3″ Stainless Steel Exhaust System! The SES1572TT exhaust system will help increase horsepower and torque while also adding a truly aggressive exhaust note.

The Injen Technology 3″ Stainless Steel Cat-Back Exhaust System is constructed with stainless steel mandrel-bent 3″ tubing in a straight-through flow design to get as much horsepower and torque as possible. The interior and exterior noise levels are truly harmonic, which means you’ll love your Civics new deep, smooth and aggressive sound after you’re done installing your new system! The Injen SES Performance Exhaust systems are proudly made in the USA at our world headquarters in Pomona California out of 304 polished stainless steel, this system also comes with dual exhaust tips, Investment cast Flanges and a band clamp that’ll make installation a breeze.

Our exhausts deliver high-quality results at competitive prices. Plus, you can install this exhaust system quickly and easily so your car spends the minimal amount of time in the garage. All in all, you get some extra horsepower with a satisfying growl that makes your 10th gen Civic stand out from all the rest.

INJEN_SES1572TT

TRUHART: Important Product UPDATES

We at LAUNCH would like to inform our dealers that All VERA Management systems (with the exception of Essential) now feature Specialty Suspension Seamless Tanks. Improvements have been made to the VERA Elite management for the 2nd Generation. In addition to the current air suspension management release of the VERA Basic Management (TH-MM03), the VERA Basic Management offers the same functionality as the VERA Essential Management but adds a baseboard and Seamless Aluminum tank.

TRUHART items to be discontinued before year end:
All StreetMAX Coilovers (TH-x9xx part #s), AirMAX Air Struts (TH-x110x part #s) and brake rotors (TH-H90xF part #s) have been discontinued. Please update your listings accordingly. We will be releasing our new line of dampning adjustable coilovers and air struts at the end of the year.

turhart-newproduct-update

MFG PRICE CHANGE: Effective May 2018 for Vibrant/KC HIlties/Centric Parts

Effective May 1, 2018 a price change will occur for the following brands:
1. Vibrant Performance (There will be an increase and decrease on select items)
2. KC Hilties

Effective May 16, 2018 a price change will occur for the following brand:
1. CENTRIC Parts (There will be an increase and decrease on select items)

Call your LAUNCH Sales Person for more details.

2018-MAY-LAUNCH-priceINC

TRUHART: New Product Applications

We’re excited to announce more applications have been added to Truhart StreetPLUS coilovers, camber kits, and control arms. Moreover, for the baggedlife enthusiast’s we have been informed that more options are now available for the Vera air management systems. Get complete details by contacting your LAUNCH Sales rep today!

turhart-newproductapp

Don't have an account yet?

Sign up today. It's free and you'll be able to see how much money you'd be saving by utilizing LAUNCH Distribution for your inventory purchases.

Sign Me Up!